Speedway Motors 24 Inch Racing Panhard Bar Kit with 3/4 Inch 4130 Chromoly Swedged Tube, Adjustable RH and LH Threads, Includes Rod Ends for IMCA Modified Sport Mod

Speedway 3/4" 4130 Chromoly swedged tube. 1-1/8" O.D., .058" wall. (2) 3/4" two-piece carbon steel rod ends with jam nuts. Available in lengths from 9"-37" IMCA Minimum Length Requirements: Northern Sport Mod = 23" (center-to-center) IMCA Modified = 19" (center-to-center) NOTE: "Length" refers to tube length. Subtract 4" from your desired working or "eye-to-eye" length when selecting a tube length to compensate for the heim ends. This will put the bar in the middle of the total adjustable range. For example, if a 25" eye to eye working length is needed, a 21" tube length will be needed.

• Complete Racing Kit: Includes everything needed to build a Panhard bar for IMCA Modified and Northern Sport Mod applications
• High-Strength Tube: 1-1/8" OD 4130 chromoly swedged tube with .058" wall thickness provides excellent strength and rigidity
• Adjustable Design: 3/4"-16 right-hand thread on one end and left-hand thread on the other allow quick length adjustment by rotating the tube
• Rod End Hardware: Includes (2) 3/4" two-piece carbon steel rod ends with hardened steel balls and jam nuts for secure metal-to-metal contact
• Sizing Guidance: 24.00" tube length; subtract 4" from desired eye-to-eye length to place adjustment range in the center for proper setup